Interroll carton flow explained for warehouse picking and rack retrofits

What Interroll carton flow is used for
Interroll carton flow is a gravity-fed storage and picking solution for cartons, totes and other light unit loads. Instead of placing every case on static shelving, a carton flow rack lets goods move from the loading side toward the pick face, so operators can access products with less walking and clearer product presentation. It is typically considered for order picking, rack retrofits, high-turnover SKUs and areas with mixed carton sizes. For broader warehouse context, see the material flow section.
The key distinction is that carton flow is not a powered conveyor. It is a rack-based, gravity-driven layer within the overall material flow design. Its performance depends on the rack layout, the carton or tote, the lane angle and the way replenishment is managed.

How carton flow works in a picking rack
A carton flow rack is normally loaded from the rear or feed side and picked from the front or output side. The lane is installed with a slight incline, allowing the carton, tote or container to roll toward the pick position under gravity. This arrangement can support first-in, first-out movement when stock is replenished from one side and picked from the other. Actual stock rotation still depends on lane discipline, labeling and warehouse management practices.
In practical warehouse design, carton flow is often placed at lower picking levels below pallet storage or inside dedicated pick modules. Fast-moving items can be presented at ergonomic heights, while reserve inventory remains above or behind the active pick face. Interroll’s public product information describes its carton flow range as suitable for light goods, order processing and high-density picking areas. The company positions the range around two main solutions: Carton Wheel Flow and Carton Versi Flow.
The main operational value is reducing unnecessary movement at the pick face. Pickers should not have to walk deep into storage locations or search through mixed cartons. Replenishment teams can load from the opposite side, which helps separate picking and replenishment work. In a well-planned layout, this can also reduce aisle congestion because the active pick side and the replenishment side do not need to share the same aisle.
Carton Wheel Flow and Carton Versi Flow compared
Interroll does not present carton flow as a single universal product. Carton Wheel Flow and Carton Versi Flow are intended for different package profiles. The choice normally depends on carton bottom quality, load weight, SKU variation and the amount of flexibility required in the lane.
| Selection point | Carton Wheel Flow | Carton Versi Flow |
|---|---|---|
| Typical use | Picking beds for cartons and totes with flat, solid undersides | Storage and picking for cartons and totes of different sizes and weights |
| Load guidance from Interroll | Suitable for totes and cartons up to 25 kg | Product information lists support up to 230 kg per module |
| Flexibility | Variable roller spacing and adjustable track positioning | Designed for mixed goods and seasonal order profiles |
| Installation context | Universal connectors allow installation in most racking systems | Modules are described as compatible with common rack crossbars |
| Temperature range | Interroll lists use from -30°C to +45°C | Interroll also lists use from -30°C to +45°C |
| Best fit | High-turnover SKUs with consistent packaging and predictable picking demand | Mixed carton sizes, variable weights and operations needing more open wheel support |
Carton Wheel Flow is the more natural fit when the load has a stable, rigid base. Interroll product details list unloading angles including standard, 5°, 10° and 15°, and describe configurable widths up to 3,600 mm and depths up to 4,552 mm. The company also states performance figures such as up to 150 picks per hour, with higher rates possible when combined with pick-to-light. These figures should be treated as product and application claims, not guaranteed results for every warehouse.
Carton Versi Flow is aimed at more variable products. Interroll describes it as useful when cartons and containers of different sizes must be stored and picked. Its large-diameter wheel design is presented as a way to improve flow for goods that do not behave as consistently as flat-bottom cartons. Interroll also describes the system as allowing loading on the feed side while goods are removed on the output side, which can support continuous replenishment in active picking areas.
Where Interroll carton flow fits in material flow design
Carton flow works best when it is treated as part of a complete material flow system, not as a standalone rack accessory. In a distribution center, product may arrive on pallets, move to reserve storage, be replenished into carton flow lanes, and then be picked into totes or order cartons. From there, orders may move to conveyor, consolidation, packing, sortation or shipping.
The strongest use cases tend to have several things in common. Demand is frequent enough to justify a dedicated pick lane. Packaging is predictable enough to roll reliably. The SKU needs quick access at the pick face. The operation also benefits from separating replenishment from picking. This is why carton flow often appears in e-commerce, spare parts, retail replenishment, grocery-related picking, pharmaceutical distribution and other operations where many small orders must be processed from a compact pick face.
Because Interroll carton flow is gravity-based, it does not add motors, drives or powered controls at the lane level. That can simplify installation and reduce power requirements compared with powered conveyor zones. However, the design then relies heavily on the physical characteristics of the carton, the lane configuration and the quality of replenishment. If the carton bottom is soft, damaged, damp or irregular, flow behavior may become inconsistent.
In rack retrofits, the practical question is not only whether the product fits the Interroll module. Designers also need to confirm beam sizes, bay widths, available lane depth, floor conditions, aisle access, fire protection requirements and interaction with existing material handling equipment. Interroll product pages indicate that both carton flow families can be retrofitted into common rack structures, but a site-specific engineering review is still necessary before installation.
Key checks before specifying Interroll carton flow
A carton flow project should start with SKU and handling data rather than a preferred rack style. The following checks help determine whether Interroll carton flow is likely to improve the picking process.
- Carton bottom quality: Flat, rigid bottoms are better suited to Carton Wheel Flow. Softer or more varied containers may point toward Carton Versi Flow.
- Weight range: Confirm the actual maximum carton or tote weight, including overfilled containers, seasonal packs and supplier packaging changes.
- SKU velocity: Reserve carton flow lanes for items with enough demand to justify a dedicated, easily replenished position.
- Pick face height: Place high-frequency picks in the ergonomic zone where possible. OSHA warehousing guidance identifies bending, overhead reaching and awkward postures as ergonomic risk factors.
- Lane depth: Deeper lanes increase storage density, but they also require reliable product flow and clear replenishment discipline.
- Replenishment method: Decide whether staff will load by hand, from carts, from pallets or through another handling method. Rear loading can create its own ergonomic risks if poorly designed.
- Temperature: Interroll lists both carton flow solutions for -30°C to +45°C, which makes them relevant to cold or deep-freeze areas, but packaging behavior in low temperatures should still be tested.
- Picking technology: Pick-to-light, scanning, voice picking and warehouse management logic should be planned early, especially where high pick rates are expected.
- Maintenance environment: Dust, torn cardboard, labels and debris can affect lane behavior. A cleaning and inspection routine should be part of the operating plan.
The most useful specification work usually happens with real product samples. Testing a representative range of cartons, weights and fill levels can show whether goods roll smoothly, stop correctly at the pick face and remain stable during replenishment.
Benefits and limitations to keep in balance
The main benefit of Interroll carton flow is pick-face efficiency. Interroll’s own product information mentions possible space savings, shorter picking time, reduced mounting time for certain configurations and the ability to present more references from a rack. These are meaningful advantages, but they depend on the warehouse layout, SKU mix and operating discipline. See also: automation and controls.
Another benefit is ergonomic presentation. Carton flow can bring products forward to the picker instead of forcing the picker to reach deep into a rack. OSHA ergonomics guidance for warehousing highlights risks associated with repetitive lifting, bending, overhead reaching, awkward postures and similar movements. A well-designed flow rack can help reduce some of those risks by improving access to frequently picked goods.
Gravity flow racks, however, do not automatically remove ergonomic issues. OSHA grocery warehousing guidance notes that gravity-fed racks may still create hazards if workers must load them by hand from the rear, reach high locations or pull heavy product over stop lips. That point is important in carton flow design: the front pick face may improve, but the replenishment side must also be safe and practical.
There are also product limitations. Cartons can deform. Totes can vary by supplier. Adhesive labels can catch. Lightweight cartons may not move as expected, while heavy cartons may need braking, guides or other controls. Stop lips, unloading angles and lane widths must be matched to the load. In some cases, static shelving, pallet flow, powered conveyor, shelving with put walls or automated storage may be a better fit.
For this reason, Interroll carton flow should be viewed as a focused material flow component. It can be highly effective when the application is right, but it is not a universal replacement for every storage or picking method.
Implementation approach for a rack retrofit
A practical retrofit usually follows a clear sequence. First, map the current pick path and identify SKUs that create excessive walking, congestion or repeated replenishment. Second, group those SKUs by carton size, weight, velocity and handling constraints. Third, decide whether each group is more suitable for Carton Wheel Flow, Carton Versi Flow or another storage method.
Next, validate the existing racking. Check beam compatibility, available bay dimensions, load ratings, fire sprinkler clearance and aisle access. Interroll product information states that Carton Wheel Flow can be installed in most racking systems through universal connectors and that Carton Versi Flow can be installed or retrofitted using connectors for common rack crossbars. Even so, rack capacity and local code requirements should be verified by qualified personnel.
Finally, pilot the design before rolling it out broadly. A pilot lane can test carton flow behavior, replenishment time, picker access, label visibility, scanning position, lane identification and cleaning routines. The results should determine the final lane angle, stop configuration, guides, pick-to-light placement and operating standard. This evidence-based approach is safer than assuming that a catalog configuration will perform the same way in every warehouse.
Frequently asked questions
Is Interroll carton flow the same as a conveyor?
No. Interroll carton flow is a gravity-based rack solution for storing and presenting cartons or totes at the pick face. A conveyor transports goods between process areas. The two can work together, but they solve different parts of the material flow problem.
When should a warehouse choose Carton Wheel Flow?
Carton Wheel Flow is best suited to cartons and totes with flat, solid bottoms, especially where the operation needs ergonomic picking, rack retrofitting and high-turnover SKU presentation. Interroll lists it for cartons and totes up to 25 kg.
When is Carton Versi Flow more appropriate?
Carton Versi Flow is more appropriate when carton and tote sizes vary, weights are less consistent, or seasonal product profiles require greater lane flexibility. Interroll describes it as suitable for diverse cartons and totes and lists support up to 230 kg per module.
Can Interroll carton flow be used in cold storage?
Interroll product information lists both Carton Wheel Flow and Carton Versi Flow for ambient temperatures from -30°C to +45°C. In practice, cold-storage users should still test actual cartons and labels because packaging stiffness, moisture and ice can affect flow behavior.
What is the biggest design mistake with carton flow?
The biggest mistake is focusing only on storage density. A dense rack that creates awkward replenishment, poor carton movement or difficult picking may reduce overall performance. The better approach is to balance density, ergonomics, replenishment access, SKU velocity and package behavior.


